Specifications, Part & Services, Museums & Clubs for Antique, Classic, Vintage and Muscle Cars

VINDataProducts ad
Ads
Bookmark this page
1930 Oldsmobile Viking Standard Series
Sedan
Standard Specifications
  Show Summary  
Original Base Price $1,695.00
No. Produced 1,871
Body Maker Fisher
No. Doors 4
Passengers 5
Model Number
Weight 3,650lbs
Wheelbase 125 inches
Length
Width
Height
Front Tread
Rear Tread
Type Own, Horizontal valves
Displacement 259.5 cu. in.
Cylinders 8
Bore & Stroke 3 3/8 & 3 5/8 inches
Compression Ratio-Std 5.1 to 1
Compression Ratio-Opt
Brake Horsepower 81@3200
Rated Horsepower 36.5
Torque
Main Bearings 3
Valve Lifters
Block Material
Engine Numbers
Engine No. Location On front end of block and on plate under floor mat, right side of front compartment.
Lubrication Pressure to all bearings excluding wrist pin
Type
Make Johnson
Type
Drive
No. Of Gears
Gear Ratios
1st
2nd
3rd
4th
5th
Reverse
Single plate
Clutch Size 9 7/8 inches
3/4 floating
Spiral bevel
Differential Ratio 4.63 to 1
Front Semi-elliptic leaf springs
Rear Semi-elliptic leaf springs
Worm & nut
Service Internal expanding on 4 wheels, mechanical
Front Size
Rear Size
Emergency Internal expanding on 4 wheels
Size
Exhaust System
Ignition System Distributor and coil
Battery 6 volt storage battery
Cooling System Water pump
Radiator Cellular
Fuel Type
Mileage
Wheel Type Artillery
Wheel Mfr Motor Wheel
Wheel Size
Tire Type
Tire Size 30 x 6
Spare Location
Fuel
Oil 7 Quarts
Transmission 1 Quarts
Cooling System 32 Quarts
Rear Differential 1 1/4 Quarts
Front Differential Not applicable
Transfer Case Not applicable
Not Rated
VIN/Serial no.
VIN Description
VIN Location On plate under floor mat right side front compartment.
General VIN Decoder

Free Decoder by Decode This!
Additional Information
This is same series listed under Viking. No. produced includes this model in all 1930 Viking series.

Paint Type
Colors Data not yet collected
Standard/Optional Equipment
Bookmark this page